Toilets often get some serious errors. But you do not need to hire a plumber always. Cause, some problems are widespread, and you can fix it yourself!
The condition is, at the initial stage; you should determine the main reason for this troubleshooting. Furthermore, you should show know the working principle a toilet. It includes two primary components.
One is a toilet bowl, and another one is an upper tank. The container is a stable solid proclaim, and it has no moving parts. The tank holds water for flushing. It has two primary float valves that regulate the flushing performance.
How does Toilet Work?
The tank holds a certain amount of water to flush the bowl. When you push the flush button, it rushes down. Then, water flows into the container.
It generates a force to eliminate the wastage away through the drain and sewer pipes. The tank has two major components: the fill valve and the flush valve. These parts help to complete the task correctly.
The fill valve is also known as a ball cock or refill valve. It locates on the left portion of the container.
Now, we are going to check out the most prevalent toilet troubleshooting and critical reason. Also, we are providing you with the most simple and quickest methods to solve it yourself.
15 exclusive DIY hacks tips and tricks to fix a troubleshoot toilet:
Problem 1: Replacing the damaged flush valve:
The valve comes in 4 basic variations.
Toilet Plunger ball cock: This is model is the oldest one, and its raw component is high-tech brasses
Diaphragm ball cock: A former model refill valve like the plunger type. Alloy requires forming it, but now a day plastic is used for preparing it.
Float cup ball cock: This ball comes with a new design. Its primary ingredients are hard plastic.
Floatless ball cock: The component is quite similar to float cup, and the hard part is resilient plastic.
In case it breaks down, you should replace it immediately. The package includes:
A. Valve assembly
C. Lock Nut
The essential tools for repairing process:
A. Rip joint pliers
B. An adaptable open-end wrench
C. A small size plastic bin.
At first, shout down the water supply and take away the tank lid.
Then, remove the lock rings and remove the refill tub.
Now, install the new one. Take away the sliding base and snap the lock ring in place. Finally, attach the refill tube with the overflow tube.
If the base condition is not ok, you should replace the entire unit. Unscrew the lock nut that locates on the shank of the valve.
Now replace the old assembly and adjust the height correctly. Then, attach the water supply tube to the valve’s shank and place the refill hose into the overflow hose.
(Note: Make sure that it will never extend under the tank’s overflow tube)
Problem 2: Repairing the Flush Valve:
Another component is a flush valve. It locates at the center of the container. Usually, it is a brass or plastic material.
A defected fill valve is the primary reason for malfunction. That’s why; you should replace it immediately after noticing it.
The interesting fact is the replacing process is simple enough, and you can do it yourself. You do not need to hire a plumber and save a ton of cash.
To carry out the task, you need the following materials:
A. A pliers or wrench
B. New valve kit
Part 1: Remove the existing one:
Step 1: Stop the water supply:
Before starting the process, you have to make sure the water supply line is turned off. You will get a valve that places on the bottom portion of a tank.
It connects to the tank’s bottom.
(More the shutoff valve in the counterclockwise direction)
Step 2: Drain away the tank water:
Now, you should make the tank empty. Press the flush button and hold it to drain a vast amount of water.
Then, take a wet-dry vacuum to absorb the rest of the running water. Even you can use a towel or sponge.
Step 3: Removing the tank lid:
The stage is the most crucial stage. Take away the tank lid. Place it in a suitable place.
Better to put it on a towel to prevent breakage. In the modern toilet, the large plastic column is considered a float ball.
But in the older bathroom, it is separate from the tube attachment.
And it adjusts with the overflow pipe.
Step 4: Disengage the fill valve:
Loosen the nuts that attach with the supply line. To make the job faster and flexible, take a wrench and tune it in the counterclockwise direction.
Part 2: Fixing a new valve:
Step 1: Get a quality valve.
For an active service, the first condition is a perfect product.
You should take an ideal fill valve that is adjustable with your toilet model.
Better to check the owner’s manual and ask the expert’s opinion.
Step 2: Set the new valve in the right place:
After removing the old package unit, place the new item in the same direction.
You should focus on the exact dimension and location. Also, you should clip the overflow tube with the latest refill tube.
Step 3: Set the washers in place:
The appliances are used to provide a tight and secured sealing with the connection point.
You have to attach these washers and the nuts to the fill valve tightly.
Step 4: Tighten the nuts and bolts carefully:
This step is another crucial stage. Cause, user satisfaction 60 to 70 % depends on proper installing.
To ensure this, you have to fix the nuts and bolts tightly and correctly. Take the wrench to do this easily and quickly.
Step 5: Reconnect the supply line and turn on water flow:
After the successful replacement; you can reconnect the water supply line to the toilet tank. Then, turn on the water supply.
Now, press the flush button to check its functionalities. Finally, adapt the float ball and positioned it in the right place.
The entire task will need only one hour. And the process is cheap enough.
Problem 3: Fix the running toilet within an hour!
A running toilet is an alarming fact to everyone. But I discovered an awesome trick to fix it instantly.
I noticed that this troubleshoot happens if the flapper does no place correctly.
If you ever face this problem, immediately check the flapper valve. Replace or repair it quickly.
Excess of water level on the tank is also a big reason for running toilet.
Required tools and materials:
2. Cutting pliers
3. Rubber gloves
4. Toilet flapper
5. Fill valve
Do the process step by step:
Step 1: Replace the fill valve (In case of emergency)
Remove the tank lid and fill tube. Reset the fill valve. If the included valve is worn; replace it instantly.
For a typical problem, repairing is far enough.
Step 2: Fix the fill height:
In this stage, you have to find out the exact dimension. Based on the water level, adjust the float, clip, and connecting rod.
Never place the cork on too high or too low position. It is the primary cause of poor flushing or overflowing.
Step 3: Adjust the flapper chain:
Cut off the additional portion of the string. Then, set the tank lid and make a minimum distance between the cover and flush rod.
Finally, replace the flapper and turn on the water supply.
Problem 4: Fix the lose or moveable handle with 2 easy tricks:
Another fundamental question is losing or disconnecting the flush handle. Instead of replacing you can repair it.
You can implement the following two methods to solve the problem.
You should reconnect the lift chain or the lift wire that connects the lift handle from the flapper.
There is a handle lifting nut surrounded by the tank. You have to adjust it and rotate the reverse threads at counterclockwise rotation for tightening it permanently.
(Note: To complete the task you do not require any heavy tools, and the process is pretty time-saving)
Problem 5: Leak toilet (Spend only 1 hour for fixing the toilet leakage):
A leaky toilet is a big reason for odor and spreads dirty water around the floor. In this time you should avoid using the washroom temporary.
Usually, this difficulty creates for a defected wax ring. That’s why you should take the following steps.
At the primary level, remove the toilet and replace a new wax ring.
Make sure you seal it correctly.
Let it dry. Wait at least half an hour to fix the seal permanently.
To complete this task, you do not need to call a plumber as it is entirely a DIY process and requires less time.
Problem 6: Never worry about a clogged toilet:
Another horrible problem is a clogging toilet. For several reasons, it can jam. But the primary two reasons are:
1. Putting unnecessary elements on the toilet bowls
2. If the wastages fail to drain away.
I find out the most straightforward technique to unclog it within a couple of minutes.
Turn off the water supply and drain the water from the toilet tank.
If you drop any unnecessary items on the bowl, you should pick it up immediately.
In this case, you can use a firm but thin rod to pick up these items. Even you can use a jack or hand gloves.
To drain away from the wastage, you can use bleach. Take a bucket of water, add some amount of bleach, and make a mixture.
Now pour it into the bowl. This solution will help you to melt the wastage and pass away quickly.
But if the clogging happens repeatedly, you must change the fill valve.
In this stage, you should reconnect the water line and fill the tank.
(Note: Most of the case, a weak flushing system hampers to drain the wastage properly. Set the container and its components correctly.
Confirm constant water flow. This way, you can make your flushing system comparatively more powerful and practical as well.)
Problem 7: Ghost Flushes:
Ghost Flushes? Not a big issue!
When no one is in the washroom, but water trickle into the toilet bowl is known as ghost flushing.
It happens for the slow leakage of water from the tank into the toilet, and the leak creates for bad quality or damaged flapper.
To get rid of this problem:
Replace or repair the old flapper. Also, check the float ball. That means you have to check out the entire tank mechanism.
Seal the leakage area. You can sue wax it. The waxing can permanently pour the leak. You may also change the old pipe.
Ensure constant water flow and connect it to the tank portion. Moreover, you have to check the drainage system and a sewerage pipe. For a rural area, you can install an up-flush toilet.
Problem 8: Weak Flush:
When the toilet bowl does not fill with water rapidly, this is known as a weak or sick flush. If the holes under the blow’s rim become clogged, you will face this trouble.
It prevents the flushed water from passing from the tank into the bowl. Then you cannot flush away the substantial wastage.
1. You should clean up these holes. It is better to use bleach water for cleaning it.
2. Also, you can use a few amounts of acid
3. Even you can make rub it with a sponge bar.
Problem 9: Overflowing:
Clogged or blocked toilet causes overflowing. The defective flushing mechanism is also a big reason for overflow. In this case:
First of all, you should stop the water supply.
Then empty the tank and clean it. Check its every part. If you find out any defect, fix it quickly and unblock the toilet.
Reconnect the water supply and check the flush.
To complete this task, you need 15 to 20 minutes only.
Problem 10: Sewerage leakage:
In this case, implement the given tricks.
Take a Teflon tape to cover up the defected pipeline.
If the pipe is too old; better to replace it immediately. Take a new one and tighten it firmly with the provided tape.
Give a final inspection. Seal the leakage (if any). Make sure that it connects with the drain line perfectly.
Problem 11: Stop your toilet cry:
Sometimes you notice that your toilet is making an irritating noise. When it flows, it closes the valve slowly and vibrates a lot. That’s why you should change the old ballcock.
Problem 12: Empty Tank:
Like the ghost flush, an empty tank also hampers flappers. To solve sit, you can do the following tricks.
The maximum flappers are chain linking type. If the chain tangled up, the flapper will stay open, and the tank will never fill.
Turn off the water supply and make the tank empty. Here you will get a chain with the flapper. Pull it out and rub it with a dry cloth. Now, galvanize it to protect decaying.
You have to fix the chain to stop this problem. At first, lift it up and then set it in the required position.
Problem 13: Get rid of the toilet odor:
To get rid of the unpleasant smell, you should wash it regularly. You can use vinegar or soda to clean up the bowl.
The household washing powder is also good enough for cleaning the toilet bowl. Another great item is bleaching powder.
It can tremendously eliminate the odor and remove the yellowish spot. But add only a few amounts of powder.
Now a day, some good quality tablets are available that you should put on the tank. When it disposes of, it will clean the bowl automatically after a flush.
That’s why you should change the old ball cock. Please check problem 1 for the solution. We have already got that covered.
Problem 14: Dripping:
Dripping is the reason for displeasing the toilet tank. That’s why, during the installing time, you should set the tank correctly. Make sure each and every part are placed in a particular position.
Problem 15: Fix your dancing toilet:
Jerking toilet is a serious problem. It indicates that you did not set it correctly. In this case, you should remove the main toilet body.
Then install it again in a proper way. Tighten every nut and bolts correctly.
Avoid the following things to prevent common toilet problems:
• Never use too much hot water for cleaning or another purpose.
• Avoid acid for unclogging.
• Never use an excessive amount of bleaches.
• You should not put any material into the toilet bowl.
• Never use too old flapper. Change it after five years.
Frequently Asked Questions:
Why does my toilet run every 15 minutes?
If the toilet keeps refilling at 15-minute intervals, it probably leaks. In most cases, the problem is with your flapper, which is the rubber seal between the tank and the bowl. Turn off your toilet shutoff valve and flush your toilet. Lastly, hold down the handle to empty your tank.
How do I temporarily fix my leaking toilet?
If water is flowing from beneath your toilet, you must stop it by merely tightening the closet bolts so that it can secure your toilet to the floor. Use a slotted screwdriver to pry off the caps that are covering the bolts. Then use a wrench to tighten each bolt, a little at a time alternately.
How much does it take to fix a wobbly toilet?
It takes an average charge of $228 to fix a broken toilet. The average project costs range from $145 and $315. if you hire a professional plumber, then it will charge a flat rate for a project. Depending on location, a pro might charge anywhere from $50 to $150 per hour for their services.
How can you tell if the toilet wax ring is leaking?
The first sign of a leaking wax ring is water that seems to be seeping out of the base of your toilet. It also causes water stains on the ceiling from the floor.
For the primary and joint problems, you can take help and idea from my provided tricks. If you can identify the issues correctly, you can solve the maximum difficulties quickly yourself.
But never be late to call a plumber if you face any severe level of challenges with your toilet.